Job Description

• Prepare and update material procurement schedule and material status and forwarding to head office.
• Evaluates quotations obtained from different suppliers & subcontractors, ensures quantities and specifications are in line with tender and projects specifications.
• Preparation of payment application and agreeing with Client.
• Prepares cost estimate for different phases of the project, advices the project management on possible cost over runs and on the action necessary to remain within the approved project budget.
• Works very close with the project team to ensure that measurements, variations and contractual matters are properly recorded and notified.
• Performs material take offs prior to the purchase requisitions for the projects and reports any irregularities or discrepancies to the project management.
• Performs and implements all post contract duties including but not limited to measurements, preparation of variations orders, analysis of site design changes, interim valuation certificates, final accounts & evaluation reports.
• Ensures proper records of agreed measurement-oriented / Item rate variation with the client's authorized representative and ensures compliance with such rates is maintained.
• Examines, controls and evaluates sub-contractors invoices and ensures the contractual obligations are satisfied and advices the project management on payments of the same.
• Take off quantities from AFC drawings and for variations
• Identify changes from AFC and Tender drawings
• Requests for variations, compiling Pricing of VO based on Contract unit rates, VO submissions
• Preparation of final accounts

Skills And Qualification

• Must worked as Similar position and background of Civil Building / utilities Project background.
• Degree or Diploma in Engineering with Respective Discipline
• Mechanical – 3 years level  minimum
• Electrical – 3 years level minimum
• Civil – 5 years level minimum

•

Job Responsibilities:

• Prepare detailed engineering documents/drawings.
• Assist in reviewing & endorsing the FEED documents
• Ensure adherence of Project deliverable to standards set through PQP.
• Coordinate with Clients & Consultants from relevant specialties
• Prepare site test reports, datasheets, method statement etc
• Prepare modification drawings for existing scheme (if required)
• Prepare effective replies to Client comments of respective submissions
• Prepare lookahead programs related to site activities Assist in the preparation of 'For Construction' Drawings.
• Monitor the preparation of final 'As Built'

Key Qualifications:

• Engineers (Mechanical disciplines) with minimum 5 to 10 years GCC experience in EPC Projects, out of which minimum 5 years with reputed Utility Companies in Saudi Arabia like NWC, SWCC, SAUDI ARAMCO etc.
• Specific experience in bigger diameter carbon steel welded pipe lines, Sewerage and Water pumping stations.
• Experience in preparing Design Specification, datasheets, MRs, TBE etc.
• Good experience in bigger diameter Carbon steel welded pipeline installations, including cement lining, coating repairs, NDT and Testing etc.
• Hands on experience in design of lift pumping stations for sewerage / water transmission pumping stations including design, installation, testing and commissioning.
• Experience in preparing drawings/documents as per design basis.
• Conversant with applicable API, ASTM, ANSI, Shell DEP standards.
• Conversant with applicable BS, DIN, ISO, ASTM, ANSI, AWWA etc
• Excellent planning & problem solving skills.
• Excellent interpersonal skills
• Good command over verbal & written English

Job description / Role

• Plan, organize, supervise and coordinate all engineering activities and permanent and temporary works designs / activities, and ensure compliance with technical and commenced contractual obligations.
• Liaise with Client, statutory authorities and technical representatives from other organizations as needed.
• Liaise with the other Site Engineers and Supervisors to ensure proper co-ordination of the site engineering including provide records and reports on all activities or non-conformances.
• Assist in programming of all site engineering activities with the Planning Manager and Project Engineer.
• Assess subcontractor/supplier QC performance / arrangements for compliance with contract requirements.
• Ensure key dates are achieved for preparation and submission (where appropriate) of quality procedures inspection and test plans etc.
• Implement, control, check on safety matters and initiate changes for improvement.
• Acquaint section personnel with QC requirements and arrangements in place to achieve them.
• Control all QC documents / records and ensure they are produced and stored by the Document Controller in a readily retrievable manner.
• Provide regular reports and analysis of QC performance to QA Manager
• Carry out random spot checks on product quality being achieved and report results/make suggestion for improvements, if appropriate
• To maintain and foster good relationship with Client’s representative and all subcontractors.
• Initiate all necessary sampling and testing.
• Encourage subcontractors to maintain good housekeeping and safe environment.
• Assist in the development and maintenance of Company systems. •
• Other duties as directed

Qualification and Skills

Education / Certification / Knowledge:
• Degree in Architectural, Building or Civil Engineering related discipline
• Excellent communication skills
• Understanding of Safe Systems of Work
• Strong Health and Safety knowledge
• Demonstrated proficiency in the Microsoft Office environment including
• Word, Excel, PowerPoint, Project and Outlook

Department:
• Site Construction

Experience:
• Requires minimum of 5 years of industry experience in Civil Work Execution at site, ElectroMechnical background in Aramco is preferred.

Job Responsibilities:

• Researching and identifying prospective suppliers.
• Liaising with internal customers and maintaining strong supplier relations.
• Evaluating products and suppliers according to key business criteria.
• Analyzing industry and demand trends and supporting the supply chain management with the development and implementation of sourcing strategies.
• Preparing proposals, requesting quotes, and negotiating purchase terms and conditions.
• Ensure the highest quality, best prices and on-time delivery for the goods/services purchased and meet specific technical specifications.
• Contact suppliers to schedule or expedite deliveries and to resolve shortages, missed or late deliveries, and other problems.
• Compare suppliers' bills with bids and purchase orders to verify accuracy.
• Respond to customer and supplier inquiries about order status, changes, or cancellations.
• Back-charge vendors & suppliers for defective/short/non-supply of materials.
• Following up with Finance for the vender payments.
• Following customs clearance process with our customs brokers. Ensuring the accuracy of HS code applied to every imported shipment
• Ensuring on-time submission of customs clearance paper to the local authorities.
• Monitoring supplier performance and resolving issues and concerns. Preparing reports and maintaining procurement records.
• Ensuring that purchasing activities in accordance with the local & international legal, governmental and company policies and regulatory standards.

Qualification:

• Bachelor's Degree in Business Administration/Supply Chain Management/ Similar Field
• Minimum 3 years as Purchasing Officer, out of 2 year in Pharmaceutical Industry.
• Knowledge of Industry & Market conditions
• Must be a Saudi National
• Excellent Communication and Negotiation Skills
• Good Interpersonal Skills
• Strong Analytical Thinking and Problem-Solving Skills ..
• Proficiency in Microsoft Office Application

Job description / Role

• Plan, organize, supervise and coordinate all engineering activities and permanent and temporary works designs / activities, and ensure compliance with technical and commenced contractual obligations.
• Liaise with Client, statutory authorities and technical representatives from other organizations as needed.
• Liaise with the other Site Engineers and Supervisors to ensure proper co-ordination of the site engineering including provide records and reports on all activities or non-conformances.
• Assist in programming of all site-engineering activities with the Planning Manager and Construction Manager/Project Engineer.
• Assess subcontractor/supplier QC performance / arrangements for compliance with contract requirements.
• Ensure key dates are achieved for preparation and submission (where appropriate) of quality procedures, inspection and test plans etc.
• Implement, control, check on safety matters and initiate changes for improvement including maintaining site security and accident report book.
• Acquaint section personnel with QC requirements and arrangements in place to achieve them.
• Control all QC documents / records and ensure they are produced and stored by the Document Controller in a readily retrievable manner.
• Provide regular reports and analysis of QC performance to QA/QC Manager
• Carry out random spot checks on quality being achieved and report results/make suggestion for improvements, if appropriate
• To maintain and foster good relationship with Client’s representative and all subcontractors.
• Initiate all necessary sampling and testing.
• Encourage subcontractors to maintain good housekeeping and safe environment.
• Assist in the development and maintenance of Company systems.
• Other duties as directed.

Qualification and Skills

• Degree in Electrical Engineering
• 5+ years relevant working experience mainly in Renovation and Maintenance Contracts.
• Good interpersonal and communication skill with planning and organizational abilities.
• Proficient in Ms Office

Preferred:

• Experience in Site construction activities in Electro Mechanical background .
• Ability to coordinate and execute projects independently
• Aramco Project background

our Principal Client's Domestic Refining & NGL Fractionation team is seeking an experienced Environmental Engineer to work in the Jazan Refinery. The refinery will have the capacity to process 400,000BPD of Arabian Heavy and Arabian Medium crude oils to product gasoline, ultra-low-sulfur diesel, benzene and paraxylene.
 

Minimum Requirements:

As the successful candidate you will have:

• A bachelor degree in environmental or chemical engineering.
• At least five years of experience in environmental regulations and standards, working in oil and gas or petrochemical facilities.
• Fluency in English, both verbal and written.

Duties & Responsibilities:

• Monitor the facility operating and business plans objectives are consistent and in-line with environmental protection policy and all applicable environmental department policies, GIs and standards.
• Identify deviations and developing solutions to environmental problems.
• Perform waste minimization assessments and advise on the handling, treatment, and disposal of solid, liquid, hazardous and toxic wastes.
• Monitor quality water return from terminal, refinery and IGCC to be in compliance with government regulations.
• Monitor the solids and chemical disposals to guarantee a safe environmental protection in compliance with government regulations.
• Monitor air quality and marine habitats.
• Implement the industrial waste manifest system study.
• Conduct special studies such as air, marine and groundwater modeling; and risk assessments.
• Conduct hazardous waste management studies.
• Evaluate significance of hazards and determine proper disposal and management methods.
• Monitor and establish industrial wastewater impact of construction projects.
• Alert to different process units and environmental damage.
• Advise and establish plans for treatment and containment.
• Perform quality control checks and advise to correct malfunctioning equipment.
• Perform studies about auto emissions and possible acid rain.
• Perform environmental impact studies for any construction projects to be developed in terminal, refinery of IGCC.
• Conduct environmental awareness program to insure Jazan Facilities.
• Prequalify environmental contractors.

The Senior Process Engineer is an experienced individual contributor role. The successful candidate needs to have strong chemical engineering fundamentals and excellent process engineering skills. The person also needs to be comfortable with ambiguity and complexity. We are valuing candidates, who think 'outside the box' and bring innovative and creative ideas.  Last but not least, we are looking for energetic people with a positive attitude and a strong initiative and a sense of project ownership.  

ACCOUNTABILITIES

This position is accountable for the following end results:

• Deliver All Objectives Safely And Achieve 100% Compliance With Safety Requirements;
• Produce Deliverables Of High Quality And Accuracy Meeting Project Requirements And Within Budgeted Timeline;
• Thoroughly Understand The Technologies Employed And The Strengths And Weaknesses Of Different Designs Or Licensor Options, And Be Able To Select The Most Appropriate Design To Meet Customer Or Project Requirements; • Design Process Cycles And Carry Out Process Optimization Using Simulation Software;
• Generate And Refine Heat And Material Balances (H &MB) And Develop Process Flow Diagrams (PFD);
• Perform Detailed Equipment Design Calculations And Specifications For Unit Operations Such As Reactors, Heat Exchangers, Adsorption Systems, Distillation Columns, Etc.;
• Perform And Refine Calculations And Produce Duty Specifications For Machinery, Vessels, Control Valves, Relief Devices, And Other Instruments;
• Support P &ID Development, Operability Reviews, Hazard Reviews, And Model Reviews;
• Interface With Third Party Equipment Suppliers And Technology Licensors;
• Work With Proposal Managers, Product Managers, Technology Department, And Procurement To Support Bid Work, New Technology Implementation, And Product Competitiveness Initiatives;
• Support Plant Start-Up And Lead Plant Performance Testing; .

MINIMUM REQUIREMENTS AND QUALIFICATIONS

• B.S. degree or higher in chemical/process engineering
• A minimum of 10 years' work experience for an industrial gas company, EPC firm or in the oil and gas sector or related industry
• Solid understanding of engineering thermodynamics, fluid dynamics and reaction kinetics • Extensive prior experience in process modeling tools, preferably ASPEN Plus
• Broad prior experiences in different process technology areas • Demonstrated prior experience in process flow sheet development and optimization
• Familiarity with different H2 and syngas generation technologies is a plus • Familiarity with ammonia and methanol synthesis processes is a plus
• Familiarity with hydrocarbon cryogenic distillation is a plus
• Work experience at site during operation and/or start-up of process plants is a strong plus
• Excellent oral and written communication, organizational and interpersonal skills
• Self-motivated and a team player  

PetroTalent Global is seeking a Piping and 3D Administrator in their client office in Al Khobar, Saudi Arabia.

Overview / Responsibilities:

PetroTalent is currently looking for a S3D / PDS Administrator to further increase the capacity and knowledge base of the well-established Mechanical department.

This will give you the opportunity to work on a wide range of EPC Client’s projects.

• Setting up PDS/S3D projects and software on server and user PCs.
•  Mainly responsible for “Technical Support” for all projects as admin.
• Acts directly under Department manager for assurance of technical capability.
• Maintain up-to-date knowledge of industry practice and new developments in the industry related to their respective area(s) of expertise.
• Inform the DTA (Dept Technical Authority) of significant technical questions and proposed solutions with the intent of maintaining a record of questions and solutions. Questions and proposed solutions shall, as deemed appropriate by the DM and DTA, be shared with the Department.
• Contribute to discipline Body of Knowledge in their respective area(s) of expertise.SME must support annual Business Plan of the company/department.
• Weekly Department objectives Tracker must be reviewed to see set targets and take action to accomplish
  assigned activities.
• If the SME becomes aware of a challenging technical issue in their area of expertise on any project, bring that issue to the attention of the SME and the Discipline Lead for the concerned project.
• Senior Lead can assign SME to work on a project as well.

Skills / Qualifications: Essential Skills:

•  PDS: Project setup, archival/retrieval, work automation through SQL/RIS, Material specs setup and MTO reporting, PD_Ortho / Isogen setup and drawing generation, 3D Modelling, Framework and Raceway setup, Training others,Error resolution. Estimation for administration hours. Sever/Client software installation.
• Workshare. Loading licenses.Preference: EDEN programming.S3D: Project setup, archival/retrieval, Material specs setup and MTO reporting, 2D Drawing setup and generation,3D Modelling, Setup for structural and electrical/instrumentation modeling, Training others, Error resolution.Estimation for administration hours. Sever/Client software installation. Workshare. Loading licenses. Preference:SmartPlant Foundation, Symbol creation, C#, VB
• Oracle and MS SQL Express installation, setup, user creation, schemas knowledge
• Generate model review files in SmartPlant Review and Navisworks.
• Customize colors, display sets. Generate tag reports. Clash check reports. Animations.
• Experience of using CloudWorx or LFM to setup laser scanning data and setting up with PDS / S3D
• 7 years minimum experience of using 3D software as modeler or administrator.
• 3 projects (at least 2 Detail design) at minimum executed as Administrator.
• Diploma or Degree in Engineering discipline.
• Saudi Aramco Standards knowledge. Preferred Skills:
• Mapping Tekla structural members to PDS/S3D for import/export
• Recommended knowledge of SPP&ID project creation, Archival/Retreival, Satellitle link, Symbol creation, Aramco EK&RD Procedures
• Have knowledge of Microstation, menu customization.Preference: AutoCAD usage • SPEL And SPI support as admin

Number of Vacancies : 2 Nos
Requirements :
At least 3 years of proven software development experience in PHP
Full stack back end through front end experience
Strong knowledge of git, and an understanding of code repository best practices
MySQL experience, with proven ability to write SQL queries
Deep familiarity with Laravel, SLIM, Clean Code
Good understanding of SOLID Principles and OOP Concept
Great sense of UI design
A bachelor s degree or any related courses
Strong Communication Skills
Ability to multitask with strict time constraint
Team player, adaptable and proactive
Need Indian National
Interested candidate can apply with your updated resume

Knowledgeable with costing & estimation terminologyand must be knowledgeable of Windows relatedprogram like MS Office specifically MS Word & Excel.Experience in…

We seek a Machine Design Engineer who is driven by the belief that technologic innovation can impact & transform the quality of life and enhance industrial working processes & businesses around the globe, you ensure the product development process of high performant ‘Mobile Utility Vehicle-built Installations’ on 2 levels:

In depth knowledge & experience of Product Design & Machinery Design in all its constituent technical fields, while being project development driven and with a strong Solidworks 3D skillset on a designing level (Modelling & Simulation).

Education – Bachelor / Master in Engineering (Machine Building and Maintenance Technology

Experience

At least 5 years experience in a Product Design Engineering environment in machinery building or equivalent

– Experience of ‘Machine Design Engineering’ in following sub-fields:

 Mechanical

 Power transmission

 Hydraulics

 Electricals

 Truck knowledge